Commercial insulation services in North Carolina
For large-span and production buildings, the work is the building envelope: roof decks, wall panels, dock openings, and the separation between production and office areas. Lift access and operating schedules set the sequence.
- Warehouse insulation. Roof decks, exterior wall panels, and dock door areas of warehouses and distribution centers, worked in zones around shipping and receiving.
- Cold storage insulation. Freezer and cooler walls, ceilings, and panel seams, on new rooms and on existing rooms resealed section by section.
- Factory insulation. Roofs, exterior walls, and interior partitions of production buildings, booked into shutdown windows where equipment runs. Process piping stays with the mechanical trade.
- Metal building insulation. Blanket, liner, and banding systems on new erection, and replacement of blanket that is compressed, torn, or wet.
- Industrial insulation services. Envelope work on large-span steel buildings: roof decks, wall panels, and high bays, scheduled around production and lift access.
Offices, healthcare, schools, and hospitality
For buildings with tenants, patients, students, or guests, the work covers walls, roofs, ceilings, and interior separations, phased so the areas being worked are released and handed back in order.
- Commercial insulation. Walls, roofs, and floors of offices, retail, and institutional buildings, on new construction, tenant build-outs, and retrofits.
- Medical building insulation. Exterior walls, roofs, and department separations in hospitals, clinics, and medical offices, worked inside the facility's infection control requirements.
- School building insulation. Classrooms, corridors, gymnasiums, and roofs of K-12 and higher-education buildings, planned around academic breaks.
- Commercial soundproofing insulation. Demising walls, corridors, and floor-ceiling assemblies built to the STC or IIC rating on the drawings.
Systems we install
The system is chosen per assembly once the building has been reviewed, and one written estimate can combine more than one system on the same project.
- Commercial spray foam insulation: open-cell and closed-cell foam where insulation and air sealing go in as one layer.
- Commercial fiberglass insulation: batts, metal building blanket, and blown fiber for framed walls, roofs, and ceiling planes.
- Commercial cellulose insulation: dense-pack fill for closed walls and loose-fill above suspended ceilings in existing buildings.
- Commercial wall insulation: cavity and continuous insulation for framed, masonry, and metal-panel walls.
- Commercial air sealing: sealing at openings, transitions, and penetrations, alongside the insulation.
Facility types in our approved markets
The building types our North Carolina market pages list most often, most common first.
- Metal buildings, shops, and hangars
- Offices, retail, and institutional buildings
- Warehouses and distribution centers
- Healthcare and medical buildings
- Manufacturing and production plants
- Multifamily and mixed-use buildings: commercial soundproofing insulation
- Cold storage and food handling
New construction installation
On new commercial and industrial construction, we install insulation and air sealing from the approved drawings and specification, after rough-in inspection and before drywall, sheathing, or roofing closes the assembly.
We work through the general contractor and the trade sequence, including shell work on data center and technology buildings, and metal building blanket and liner systems go in as panels close in.
- Submittals and product data provided when the specification calls for them
- Wall, roof, slab-edge, and rated assemblies installed to the drawings
- Work sequenced so each area is ready for its inspection
Retrofit and replacement in existing facilities
In existing buildings we add or upgrade insulation, often without removing what is there, and replace material that is wet, compressed, or failed. Where removal is needed, it comes first and is listed separately in the estimate.
- Metal building liners and blanket replacement on warehouse and shop roofs
- Dense-pack fill in closed walls and added material above open ceilings
- Resealing cooler and freezer panels one section at a time
- Tenant build-outs and renovations in offices, clinics, and schools
- Envelope upgrades in plants, coordinated with shutdown dates
Scheduling around occupied sites
Whether part of a building can stay in use depends on the layout, access, and the work involved. Where it can, the work is phased by zone, floor, or bay, and the phasing is agreed with your facility team before work starts.
- Warehouses: roof and high-wall work from aerial lifts in released aisles or bays.
- Plants: areas next to running equipment booked into shutdowns or shift gaps.
- Cold storage: a cooler or freezer section comes out of service while it is resealed.
- Offices, clinics, and schools: work phased floor by floor, with after-hours shifts where the building requires them.
- Multifamily: rated walls and floors built to the tested assembly on the drawings.
Why contractors and owners hire us
- The commercial and industrial division of Polar Insulation, headquartered in Wewahitchka, FL
- New construction and retrofit work for general contractors, developers, owners, and facility managers
- Spray foam, fiberglass, cellulose, and air sealing, matched to each assembly
- A written estimate before any work is scheduled
What we need for an estimate
Send what you have. Drawings and the specification speed up a new-construction takeoff; photos help on an existing building. The written estimate names the system, the coverage area, the R-value target, any removal, and the schedule.
- The project address and building type
- Approximate square footage and clear height
- Racking layout, aisle widths, and the dock schedule
- Shutdown dates and which production areas can be released
- Room temperatures and how long a section can be offline
- Occupied hours and whether after-hours work is needed
Statewide project delivery and GC coordination
Commercial and industrial crews mobilize across North Carolina from the Polar Insulation headquarters at 511 S. Hwy 71, Wewahitchka, FL 32465 and regional staging points for scheduled new-construction and facility retrofit scopes.
| Service footprint | 8 approved North Carolina markets, listed below |
|---|---|
| Facility types served | Metal buildings, shops, and hangars, offices, retail, and institutional buildings, warehouses and distribution centers, and healthcare and medical buildings |
| Project scopes | New commercial construction from plan takeoffs, and retrofits or re-insulation in occupied facilities |
| GC submittals and documents | Written estimate, product data submittals when the specification calls for them, corporate W-9, state contractor licensing details, and Certificate of Insurance (COI) |
| Crew mobilization | Dispatched from the Polar Insulation headquarters in Wewahitchka, FL and regional staging points |
Commercial markets served in North Carolina
We schedule projects in these 8 markets. Each market page lists the building types and services for that market. Specifiers can find the adopted energy code and the climate zone for each market in the North Carolina commercial R-value guide.
| Market | County | Facility types listed |
|---|---|---|
| Cary, NC | Wake County | Corporate campuses and offices; Technology and research facilities; Healthcare and institutional buildings |
| Charlotte, NC | Mecklenburg County | Corporate and financial offices; Distribution and logistics warehouses; Manufacturing and assembly plants |
| Durham, NC | Durham County | Research and bioscience facilities; Healthcare and medical buildings; University and institutional buildings |
| Greensboro, NC | Guilford County | Aviation and aerospace facilities; Distribution and logistics warehouses; Manufacturing and assembly plants |
| High Point, NC | Guilford County | Manufacturing and assembly plants; Showroom and exhibition buildings; Distribution and logistics warehouses |
| Raleigh, NC | Wake County | Technology and research campuses; Government and institutional buildings; Healthcare and medical facilities |
| Wilmington, NC | New Hanover County | Port and terminal facilities; Film and production studios; Healthcare and institutional buildings |
| Winston Salem, NC | Forsyth County | Healthcare and medical facilities; Bioscience and research buildings; Manufacturing and assembly plants |
Questions from project teams
How do I submit drawings for a commercial takeoff in North Carolina?+
Email the architectural drawings and the Division 07 specification for new work, or the building dimensions and photos for an existing building, to info@insulationcompany.net, or start with the estimate form or a call.
Can an occupied office or healthcare building in North Carolina stay open while it is insulated?+
Often. Whether a building can stay open depends on its layout and the work involved, and the phasing is agreed with your facility team before work starts.
What documents come with a proposal for a North Carolina project?+
Proposals include our corporate W-9, the state contractor licensing details for the project, and a Certificate of Insurance (COI) naming the property owner or general contractor as an additional insured, issued before crews mobilize.
What insulation systems do you install on North Carolina commercial projects?+
Closed-cell and open-cell spray foam, metal building blanket and liner systems, continuous board and cavity insulation in walls, fiberglass batt in framed and rated assemblies, cellulose in existing cavities, and air sealing at openings and penetrations.
Do you work for general contractors as well as owners?+
Yes. On new construction we usually work through the general contractor and fit into the trade sequence before close-in. On retrofits we often work directly for owners and facility teams.
Planning a project in North Carolina?
Tell us the building type, the market, and what needs to be insulated. We'll come back with a written estimate.
- We review itWe confirm the requirements and anything that affects access.
- Walk or takeoffAn on-site walk or a takeoff from your plans and specs.
- Written estimateClear pricing and the system we would recommend, before any work is scheduled.
Prefer to call? (850) 639-9272